LOCTITE® AA 324 is a transparent,
light amber, urethane methacrylate ester acrylic structural adhesive liquid for bonding flat parts
together. It is specially suitable for joining dissimilar materials, e.g. ferrite to plated materials in
electric motors, loudspeakers, etc.
1. For best performance bond surfaces should be clean and
free from grease.
2. To ensure a fast and reliable cure, Activator 7387™
should be applied to one of the bond surfaces and the
adhesive to the other surface. Parts should be assembled
within 15 minutes.
3. The recommended bondline gap is 0.1 mm. Where bond
gaps are large (up to a maximum of 0.5 mm), or faster
cure speed is required, Activator 7387™ should be
applied to both surfaces. Parts should be assembled
immediately (within 1 minute).
4. Excess adhesive can be wiped away with organic solvent.
5. Bond should be held clamped until adhesive has fixtured.
6. Product should be allowed to develop full strength before
subjecting to any service loads (typically 24 to 72 hours
after assembly, depending on bond gap, materials and
ambient conditions).
By clicking “Accept Cookies” you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Henkel Authorized Brands
100% Original Products
Secure Payments
100% Buyer Protection
Product Recommender 
Value Calculator 
Track Order
Offers 
Contact Us 
1800 123 1922 
Maintenance
of Pumps
Maintenance
of Electric
Motor
Maintenance
of Gearbox
Maintenance
of Compressor